DuraForce Geotextile
- Quick and easy to lay
- Convenient sized packs & rolls
- Manufactured to ISO 9001 standards
- Allows water to flow through while blocking out sediment
About Product
DuraForce will help prevent your next paving project from failure by separating the clay layer from the sand or gravel layer. If geotextile is not used, the clay mixes with the sub-base aggregates causing the sub-base to lose strength and fail.
Nonwoven geotextiles are used primarily for drainage, filtration, separation, reinforcement and protection.
Product Specs
Code
Product
Size
DuraForce is available from Mitre 10 stores
Documentation
Frequently Asked Questions
Which side up should the DuraForce be laid?
While one side of the geotextile may be fluffier than the other, it doesn’t matter which way up it is laid, the performance of the geotextile will be the same.
Is DuraForce geotextile UV stable?
Our geotextile is tested for UV resistance, and has a retained strength of 50% or greater (Tested in accordance with AS3706.11).
In reality this means the product is UV stable for the duration of exposure and working times, but it is not designed to be exposed for years.
Does the colour make any difference?
No. The grey and black fabrics have a pigment added, usually to hide imperfections in the raw material due to recycled material being used.
Won't weedmat do the job just as well?
We do not recommend using weedmat in place of geotextile. Weedmat will provide separation between two materials to some extent, however as it is typically a light grade, sharp stones used for base course and retaining walls will tend to rip this and render it useless.
